Piston Ring
 |
No items matching your keywords were found.
|
 |
Yamaha Piston & Ring assy 1.00mm OS |  |
 |
US $37.00 | 6d 15h 38m |
 |
COLUMBIA / HARLEY GOLF CART PART PISTON RING SET .10MM OS 2 CYCLE | |
|
US $18.95 | 8d 11h 5m |
 |
EZGO GOLF CART PART PISTON & RING ASSEMBLY 295CC STANDARD | |
|
US $52.20 | 11d 10h 15m |
 |
EZGO GOLF CART PART PISTON & RING ASSEMBLY 350CC STANDARD | |
|
US $52.20 | 11d 10h 30m |
 |
E-Z Go Piston & Ring Set (1989 - 1993) 2-cycle (.25mm over) | |
|
US $76.00 | 3d 14h 10m |
 |
Club Car Golf Cart part std. piston ring set 84 -91 | |
|
US $36.99 | 10d 17h 49m |
 |
Yamaha GOLF CART PART PISTON & RING ASSEMBLY G1 2-Cycle Gas .25MM oversized | |
|
US $47.45 | 4d 14h 29m |
 |
EZGO 2 Cycle Gas Golf Cart 1980-89 Piston and Ring Kit Standard Bore 2 PG | |
|
US $67.95 | 5d 17h 3m |
 |
EZGO 2 Cycle Gas Golf Cart 1980-89 Piston and Ring Kit .25mm Oversize 2 PG | |
|
US $67.95 | 5d 17h 5m |
 |
EZGO 2 Cycle Gas Golf Cart 1980-89 Piston and Ring Kit .50mm Oversize 2 PG | |
|
US $67.95 | 5d 17h 6m |
 |
EZGO 2 Cycle Gas Golf Cart 1989-93 Piston and Ring Kit Standard Bore 3 PG | |
|
US $59.95 | 5d 11h 51m |
 |
EZGO 2 Cycle Gas Golf Cart 1989-93 Piston and Ring Kit .25mm Oversize 3 PG | |
|
US $59.95 | 5d 11h 52m |
 |
EZGO 2 Cycle Gas Golf Cart 1989-93 Piston and Ring Kit .50mm Oversize 3 PG | |
|
US $59.95 | 5d 11h 53m |
 |
Yamaha Piston & Ring Set (G1) 2 Cycle (.25mm OS) | |
|
US $61.00 | 12d 12h 23m |
 |
Yamaha Piston & Ring Set (G1) 2 Cycle (.50mm OS) | |
|
US $61.00 | 12d 12h 31m |
 |
EZ GO Golf Cart part piston and ring set 4-cycle | |
|
US $56.99 | 7d 18h 21m |
 |
GOLF CART PART CLUB PISTON AND RING ASSEMBLY FE350 | |
|
US $55.57 | 25d 5h 55m |
 |
Club Car Golf Cart part piston & ring set std. 92-up | |
|
US $56.99 | 19d 13h 16m |
 |
Yamaha Piston & Ring Set (G2,G8,G9 & G11) (.50mm oversize) | |
|
US $78.00 | 3d 14h 36m |
 |
Club Car Golf Cart part piston & ring set 84-91 | |
|
US $64.49 | 19d 11h 35m |
| Powered by phpBay Pro |
Piston Ring
should a piston ring have no gap when totaly compressed?
I messured everything as close as i could to oem specs. im installing low comp pistons and eagle rods into my block.. it was over oem specs. but i made sure that all the gaps were the same. I noticed that with the rings completely compressed the rings have no gap.. is this normal?
oh sorry my cyl was bored ,20 over
as of 10:24 i Busted a ring.. my 4th piston.. so ima take it to some one... first it was main bearings cause i had to replace the block. Junk yard gave me a 1995 block and didnt tell me.. so it has different bearings for crank, bought bearings for the 1996+ and didnt work.. well the thrust bearing.. and now this.. I give up im taking it to some one.. love the car tho
The proper way to measure ring gap is to insert the ring alone into the cylinder and use the piston to push it down evenly about 2". Then use a feeler gage that is the minimum thickness of the spec and if that passes through the gap is ok. Then use a feeler gage that is the max spec and if it is tight or wont pass through, all is good. If the gap is below minimum spec, the ends of the ring can be filed to enlarge the gap. If the gap is too big, there is a problem with the bore size or the size of the rings ie, wrong parts. Each ring set should be checked in the cylinder that it is going to run in>
Using a Piston Ring Compressor.wmv
|
No items matching your keywords were found.
|
|
Yamaha Piston & Ring assy 1.00mm OS | |
|
US $37.00 | 6d 15h 38m |
|
COLUMBIA / HARLEY GOLF CART PART PISTON RING SET .10MM OS 2 CYCLE | |
|
US $18.95 | 8d 11h 5m |
|
EZGO GOLF CART PART PISTON & RING ASSEMBLY 295CC STANDARD | |
|
US $52.20 | 11d 10h 15m |
|
EZGO GOLF CART PART PISTON & RING ASSEMBLY 350CC STANDARD | |
|
US $52.20 | 11d 10h 30m |
|
E-Z Go Piston & Ring Set (1989 - 1993) 2-cycle (.25mm over) | |
|
US $76.00 | 3d 14h 10m |
|
Club Car Golf Cart part std. piston ring set 84 -91 | |
|
US $36.99 | 10d 17h 49m |
|
Yamaha GOLF CART PART PISTON & RING ASSEMBLY G1 2-Cycle Gas .25MM oversized | |
|
US $47.45 | 4d 14h 29m |
|
EZGO 2 Cycle Gas Golf Cart 1980-89 Piston and Ring Kit Standard Bore 2 PG | |
|
US $67.95 | 5d 17h 3m |
|
EZGO 2 Cycle Gas Golf Cart 1980-89 Piston and Ring Kit .25mm Oversize 2 PG | |
|
US $67.95 | 5d 17h 5m |
|
EZGO 2 Cycle Gas Golf Cart 1980-89 Piston and Ring Kit .50mm Oversize 2 PG | |
|
US $67.95 | 5d 17h 6m |
|
EZGO 2 Cycle Gas Golf Cart 1989-93 Piston and Ring Kit Standard Bore 3 PG | |
|
US $59.95 | 5d 11h 51m |
|
EZGO 2 Cycle Gas Golf Cart 1989-93 Piston and Ring Kit .25mm Oversize 3 PG | |
|
US $59.95 | 5d 11h 52m |
|
EZGO 2 Cycle Gas Golf Cart 1989-93 Piston and Ring Kit .50mm Oversize 3 PG | |
|
US $59.95 | 5d 11h 53m |
|
Yamaha Piston & Ring Set (G1) 2 Cycle (.25mm OS) | |
|
US $61.00 | 12d 12h 23m |
|
Yamaha Piston & Ring Set (G1) 2 Cycle (.50mm OS) | |
|
US $61.00 | 12d 12h 31m |
|
EZ GO Golf Cart part piston and ring set 4-cycle | |
|
US $56.99 | 7d 18h 21m |
|
GOLF CART PART CLUB PISTON AND RING ASSEMBLY FE350 | |
|
US $55.57 | 25d 5h 55m |
|
Club Car Golf Cart part piston & ring set std. 92-up | |
|
US $56.99 | 19d 13h 16m |
|
Yamaha Piston & Ring Set (G2,G8,G9 & G11) (.50mm oversize) | |
|
US $78.00 | 3d 14h 36m |
|
Club Car Golf Cart part piston & ring set 84-91 | |
|
US $64.49 | 19d 11h 35m |
| Powered by phpBay Pro |
|
No items matching your keywords were found.
|
No items matching your keywords were found.
 |
LEM Products 5 Pound Stainless Steel Vertical Sausage Stuffer
List Price:  |
Description5-lb. Vertical Stainless Steel Sausage Stuffer. Perfect sausage every time! Nothing beats homemade! Clamp the Stainless Steel Stuffer to a table or countertop and crank it out! The special air valve release pushes air out the top... |
 |
Piston O Rings Replacement Set for Stout Faucet
|
DescriptionReplacement O rings for stout faucet piston. Set includes two O rings. In stock and ready to ship. Features: Use for your stout faucet piston. Made of rubber. Includes: 1: Shaft O-Ring - Small. 1: Shaft O-Ring - Large. |
 |
La Peppina Piston O-Ring Gasket Washer Rebuild Set
|
DescriptionLa Peppina Espresso Machine Rebuild Set contains the parts need to restore your vintage FE-AR La Peppina to top performance & great Espresso Production! In the La Peppina machine the piston is sealed with a single large o-ring... |
 |
Porter-Cable FR350A Round Head 2-Inch to 3-1/2-Inch Framing Nailer
List Price: |
DescriptionIdeal for carpenters, woodworkers, and do-it-yourselfers, the Porter-Cable FR350A 3-1/2-Inch Round-Head Framing Nailer Kit has all the power you need to drive round-head framing nails into engineered lumber... |
 |
Powerbuilt 648433 Piston Ring Compressor
|
 |
Hitachi NV65AH 2-1/2-Inch Coil Siding Nailer
List Price: |
DescriptionLightweight and durable, the Hitachi NV65AH Siding Nailer is a contractor-preferred pneumatic tool with high-performance capabilities. An ideal tool for siding, fencing, decking, roof sheathing, and more, the NV65AH has everything you need, including a high-capacity magazine, tool-less depth adjustment, a 360-degree exhaust diverter, and a pneumatic drive system... |
 |
Dynarex Piston Irrigation Syringe 60 cc - each
|
DescriptionPrecision crafted O-ring ensures a positive seal. Finger rests and thumb ring provide control. Calibrated in cubic centimeters and ounces. 60 cc capacity. Sold each |
 |
Disney Cars 2 World Grand Prix Cupcake Rings (24)
|
Description24 Disney Cars 2 Wrold Grand Prix cupcake rings. |
 |
Feeding and Irrigation Syringe - Irrigation/feeding syringe, IV pole bag, luer tip adapter, flat ring plunger, rounded with flat top, 60cc - 30 Per Case - Model DYND70642
|
DescriptionThis kit includes a flat-top 60 cc piston syringe with luer tip adapter, I.V. pole bag with resealable flap and write-on patient I.D. label. |
 |
Piston Ring Installer 3/16" to 1/4"Expander Pliers
|
How much does it cost to replace piston rings in a car?
There's a 1997 Hyundai Elantra with 325,000 miles. They want to sell it for $300 and he said that all it needs is new piston rings and the transmission is fine. I test drove it and the manual shifts alright. Anyway, how much is it to replace piston rings, parts and labor?
I would offer $100. But before I would do that I would check with the scrap metal dealers to see what they would give you. You might have to drain all the fluids before they would take it and you might even have to bring it to them. Also check with auto salvage companies but I doubt they would pay much due to the mileage. In my opinion the car is not something you should even consider.
Why are you looking at $300 cars. You need to get someone that can help you make a sensible decision about buying a car! Just my opinion but it sounds like you might have been taken advantage of in the past without getting help when it is time to make decisions like this and possibly some other choices and directions you have chosen in the past.
You did come this site and that's a great start. Happy Holidays
Woody
piston ring compressor – 2205